The map shows the last position of all your vehicles or a certain group of vehicles. Below the map, you will see a table which contains the last position for each vehicle and detailed information about it.
Under certain circumstances it is possible that this position does not coincide with the actual position of the vehicle. This might for example be the case if the box could not send data via GPRS for a long period of time and begins to empty its message memory.
Group selection
If you only want to see a certain group of vehicles, proceed as follows:
- Select an entry from the "group" selection box or
- Enter the name of the group in the input field with the selection box open and select an entry from the filtered list.
Map navigation
Within the map there are various means and methods available to optimize and / or narrow down the information you require.
Zoom
 | Zoom in |
Navigation
 | Move the map |
Map type
 | Change map type Show / Hide traffic informations |
Toolbar
 | Show / hide Toolbar |
 | Reload positions |
 | Switching "Vehicle grouping" on /off |
 | Switch AutoZoom on / off |
 | Enable / disable rectangle zoom |
 | Apply filter |
 | Search adresses |
 | map favorites |
 | Switch "ShowAdresses" on /off |
 | Map settings |
 | Load map in full screen |
Vehicle list
 | Show / hide List of vehicles |
Main actions
There are several global actions available in the entire module "Overview map / vehicle status".
These are displayed as a drop-down button in the upper right corner of the map.
By clicking on the arrow of the button, a menu opens, in which the various actions can then be selected and executed or started.
 | Reload map overview | Reloads the map and the table with the vehicle data |
 | Open popup | Opens the overview map and the vehicle status table in a common new popup (window) |
Vehicle status
The table shows a certain number of entries, depending on the setting. The number can be temporarily adjusted directly in the tab head. There is also a search field on the right above the table, which is used to search for specific vehicles.
Furthermore, the data can be sorted ascending or descending depending on the column.
The number of columns depends on the available data of the vehicles. As soon as a vehicle delivers data to a particular column, it is displayed in the table. However, certain columns are always available. Vehicles for which there are no current position messages are displayed in the table with the entry "No position present".
The following columns can appear in the table in this order:
| Nr. | Column description | Description | Optional |
|---|---|---|---|
| 1 | Vehicle icon with ignition status | no | |
| 2 | object name | Name of the vehicle | no |
| 3 | Advanced status message | yes | |
| 4 | driver | Name of the current driver | yes |
| 5 | date | Date and time of the last position message | no |
| 6 | position | Address or name of the last known position | no |
| 7 | driving time | driving time of the current day | yes |
| 8 | steering time | yes | |
| 9 | Analogue 1 | Analog input number 1 | yes |
| 10 | Analogue 2 | Analog input number 2 | yes |
| 11 | Analogue 3 | Analog input number 3 | yes |
| 12 | Analogue 4 | Analog input number 4 | yes |
| 13 | Euroscan 1 | Euroscan input number 1 | yes |
| 14 | Euroscan 2 | Euroscan input number 2 | yes |
| 15 | Euroscan 3 | Euroscan input number 3 | yes |
| 16 | Euroscan 4 | Euroscan input number 4 | yes |
| 17 | Euroscan 5 | Euroscan input number 5 | yes |
| 18 | Euroscan 6 | Euroscan input number 6 | yes |
| 19 | Euroscan 7 | Euroscan input number 7 | ja |
| 20 | Euroscan 8 | Euroscan input number 8 | ja |
| 21 | est. arrivaltime | Expect time of arrival at the current navigation destination | ja |
| 22 | remaining time | Remaining travel time to the current navigation destination | ja |
| 23 | remaining distance | Remaining distance to the current navigation destination | ja |
| 24 | targetposition | Current navigation target | ja |