You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Provided that your own the appropriate, supported hardware and have booked the option "driverbehaviour" you can set on this page the configuration limits for your rating.

Index

Summary

With your Yellowfox-box you can rate your drivers by several aspects and create reports over it. On this page you can set the base settings for your rating per object. In this way you are able to divide trailers and cars for instance.

Please be aware this option is only available to you, if you own supported hardware and have booked the appropriate option.

Settings

Load standard configurations

You can access a preset of standard configurations for trailer or car by choosing from this list. If you already configured objects for driverbehaviour ratings, you can access their settings as preset here too.

Setting deceleration

When exceeding this limit, the current decelaration is rated negative.

Setting acceleration

When exceeding this limit, the current acceleration is rated negative.

Setting limit value driving curves

When exceeding this limit of g-forces, the curve drive is rated as driven to fast and aggressive.

Setting limit value and duration underspeed

This limit is used to rate a part of a drive as idledrive when a speed is undergone for a defined time.

Setting limit value and duration underspeed

This limit is used to rate a drive as drive with overspeed  when a speed is exceeded for a defined time.

Save

By clicking on this button you send your settings to the box and save them. Now you can use these values as preset by choosing it from "standard configurations" for other objects.

  • No labels