On this page can be configured the behavior of devices with analog sensors.

Index

On a box various analog sensors can be connected. These sensors can be configured here.

Message interval when ignition is off

Here you can configure the time interval of sending when the ignition is turned off.

Configure inputs

This type of sensor is connected to the ABox and measures temperature.

Is the monitoring of the input enabled, the following settings can be made for it.

Valid from - to °C	Here, the temperature range is determined in which no messages are generated. If the measured temperature is outside the set range, the box sends an alarm message .
*Alarm after seconds**	Only when the measured temperature is the set time in seconds out of range should a message be sent.
*Alarm cancle after seconds**	After how many seconds in the valid temperature range the alarm should be canceled?

Any change to the settings of an input must, if enabled, will be secured on the "Save" button.