This modul uses position data of the cars to determine expenses for your employees. CommonExpenses will be payed if an employee must work outside of his working place. Also he cannot be at his principal residence. This time calls absence. The legislator published on yearly base lists with legal costs rates for each country. These rates are the basis of expenses calculation. For calculation are needed information about first working place and principal residence for each employee. Expenses are divided in: - Absence over 8 hours (arrival and departure)
- Absence of 24 hours
- over night
Expenses will be calculated according German law for companies which are located in Germany. The calculation runs over night and it calculates expenses until day before yesterday. ConfigurationYou have to assign a first working place and a principal residence for your personnel to get calculated expenses automatically. In addition you can define further working places to interrupt absence. Create and provide of working place will be explained in chapter 'working places'. You have to edit personnel data to activate expenses. Click on 'Activate expenses calculation for this person'. Choose an already defined working place and assign a validation. Expenses will be calculated from now on. There is a possibility to assign working place for several employees in one step. Check these employees under personnel. An assistant will pop up by clicking on this symbol  to assign working places. Expenses editorAfter selection of a driver and time period expenses will be shown in a table. Each row contains expenses for a day. Days without expenses will be shown gray.
This table shows the follow: - day of expenses
- start and end of longest absences period of this day
- duration of absence
- cars which were used in this period
- expenses region, by click on this symbol it opens an overview with border crossings of this day
- expenses for meals and over night
- field for comments
Entries with * have a period which could be used for expenses. Hover shows detail information for this period. ActionsEdit entryManually changes can be made with inline editor. There can be added comments to the comment field. Table will be updated after saving this entry. Modification of expensesLegal requirements can be adapted for this company in settings. It can be set a fixed amount or a value in precent. All countries and regions are affected by these changes.. Export of expensesIt can be exported current view from expenses editor as PDF, Excel or CSV. The report center gives you possiblity to generate series and export them as HTML, PDF, Excel or CSV.
A generate report contains a conclusion of costs divided in total costs, meal and accommodation for selected period. Furthermore you will get a list of all days with expenses. Legal regulations for Germany | rule | description |
|---|
Absence | means that the employee has been instructed by the employer to carry out an activity in which he is staying outside the first place of work. Furthermore, the employee must not be at his private address. | Full expenses | will be payed, if absence is 24 hours. | Reduced expenses | will be payed, if absence is larger than 8 hours. Furthermore at days of arrival and departure. These are days before or after a whole day absence. | | midnight rule | If the work starts after 4 pm and ends before 8 am on the following calendar day and there is NO overnight stay. This absence is to be added to the calendar day with the predominant absence. |
Working placesUnter diesem Punkt können Sie Tätigkeitsstätten anlegen und verwalten. Beim Anlegen einer neuen Tätigkeitsstätte können Sie dieser eine passende Bezeichnung vergeben.
Desweiteren stehen folgende Optionen zur Verfügung: | option | description |
|---|
| Radius | Defines the size of the sphere of this working place. | Interruption of absence | immediately, 30 minutes, 1 hour…
Determines how long the vehicle may stay in the workplace without interrupting the absence in terms of expenses. | | Type of working place | Type of working place is determined. ( principal residence, first working place, further working place ) |
Working places can be edited at any time. Changes will be applyied immediately. There is a history where you can see your changes. On page "map" are all working places with their defined radius shown. Working places can be assigned to a single or several drivers on page "assigments". Assigments can be done in personnel tab as well. There you choose a working place from a select box and set a validation. Principal residence can be created here as well. Expenses SettingsExpenses settings are in settings of this module. | rule | description |
|---|
For one-day trips abroad, which start and end in a place of work, should be the expense | If the employee travels abroad from one country to another within one day and back home again, the employer can always refund the lump sum for the non-resident state in which your employee last stopped. With this setting, you can specify whether the lump sum for the last foreign state or the rate of compensation of the place of work is used for the calculation. | | Default value for the radius of a working place | The radius of the working place determines in which area around the fixed position an interruption of the absence takes place in the sense of the expenses. If the vehicle drives or passes through this area, the expense time will be interrupted. The longest absence period of a day is evaluated. | | Interruption of absence | It is possible to set a maximum residence time for a place of work. In this period, a vehicle can thus be in the respective place of work, without the absence time in terms of expenses is interrupted. Each time you drive to the place of work, the complete break time is available. | | Recognition start expense relevant period | The absence in the sense of the expenses begins with the leaving of the area of the place of work and ends with the driving of this area. The user can choose between the following two modes: By ignition and standstill
In this mode, the time of absence begins and ends with the ignition signal or upon detection of a vehicle stall. This setting may be useful during loading operations within a site with the ignition on. This is the case, for example, if the vehicle has a mobile crane. By ignition
The period of absence begins when the ignition is switched on within the workplace and ends with the ignition being switched off after driving in this area.
|
| 
