Versions Compared

Old Version 19

changes.mady.by.user YellowFox R&D

Saved on

compared with

New Version 20

changes.mady.by.user YellowFox R&D

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Sv translation
languageen

On this page can be configured  the behavior of devices with analog sensors.

Panel
titleIndex

Table of Contents
maxLevel3
indent20px

On a box various analog sensors can be connected. These sensors can be configured here.

Message interval when ignition is off

 Here you can configure the time interval of sending when the ignition is turned off.

Configure inputs

Sensortype: PSU5 (5V Voltage Reference Level)

This type of sensor is connected to the ABox and measures temperature.

Is the monitoring of the input enabled, the following settings can be made for it.

Valid from - to °CHere, the temperature range is determined in which no messages are generated. If the measured temperature is outside the set range, the box sends an alarm message .
Alarm after * secondsErst wenn die gemessene Temperatur die eingestellte Zeit in Sekunden außerhalb des zulässigen Bereiches liegt soll eine Meldung geschickt werdenOnly when the measured temperature is the set time in seconds out of range should a message be sent.
Alarm cancle after * secondsNach wievielen Sekunden im gültigen Temperaturbereich soll der Alarm wieder aufgehoben werden?After how many seconds in the valid temperature range the alarm should be canceled?

Jede Änderung zu den Einstellungen eines Einganges muss, wenn dieser aktiviert ist, über dessen "Speichern" Schaltfläche gesichert werdenAny change to the settings of an input must, if enabled, will be secured on the "Save" button.