You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Index

  • Please note the basics of area monitoring.
  • The number of simultaneously usable areas depending of hardware and firmware version are different.

  • Areas are rectangular

Create new alert area

To create a new alert area, click on the appropriate icon () in the quickbar.

First enter a name for the area (e.g. Company ).
Optional you can specify a cost center.

To draw a new area, you must zoom in into the desired map section.
With the function "draw area" you can draw with the left button of mouse a alert section.

Now you can save the new alert area.

Alarmgebiete mit einer Kantenlänge kleiner 100 Meter können aufgrund von Schwankungen im GPS-System zu unsinnigen Warnmeldungen führen.

Alarm areas with a edge length smaller than 100 meters

Due to variations in the system

Show alert area

To show a existing alert area, click on the show icon () in the list.

Delete alert area

You can't delete a alert area that are currently in use.
These areas must be disabled first in area monitoring.

After you have disabled the area, you can use the delete icon ().

 

Buttons of Quickbar:
NewCreate new alert area

Display settings

Adapt Display settings

Help

Opens this help

Quicklink

Sets the Quick search as Quicklink

  • No labels