You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 49 Next »

At this page you will get an overview of the position messages of an object. Although you can locate the object and display the locate settings.

QuickBar

object selection

Select the object from which you want to see the position messages.

"navigate to" links

Object Settings= configure the settings of the object
Quick Search= simple search of position messages
Search Assistant= escortet search of position messages

Actions

locate now= locate the object now
reload= refresh the position list
start LiveTracker= starts the LiveTracker for this object
show detail information= shows the current locate settings of the object
display settings= configure the display settings of the portal
open help= open the help for this topic
QuickLink= creates a Quicklink for this page

position messages

Message are devided into 2 groups, which are displayed diferent.

The first group are telemetry messages. These messages shows details of telemetry states.

The second group are all other message types, e.g. cyclic location messages. In these messages no telemetry states will be shown. To get more informations of one of those messages click on "Details".

It is possible to set the same layout for both types of messages. For more information go to display settings.

Every position record contains the following informations: located vehicle, date, time, weekday, cause of message, position as text, velocity, odometer value, telemetry state

A yellow star behing the position message means, that the gps-signal at the moment of location was not enough to get the real position.

A click on the satellite dish (right hand side) opens a window, which will show you the quality of the gps-signal and gives you other backround informations. If the exclamation mark is blinking, so you get more informations for this position message when you click on it.

If the located object is minimum in the "Business" rate you can also see following informations: position description, remark, tank receipt data.

The position description is set if you click on >>. Your position description will be displayed in blue print everytime at this position. E.g. you set the position description to "COMPANY XY LTD." everytime a vehicle of your fleet is located in the near of 50 meters of this position you will not be seen the street name but the "COMPANY XY LTD.".

Remark: To every position you can add an comment. At first click on [Details], after that to [remark edit]. Add now for example "delivery note 123". Everytime you will search this record, you will see the remark "delivery note 123".

tank receipt data: At every telemtry message "ignition off" you will see at [Details] a fuel pump symbol. On click, if this was a message was a tank stop, you can enter the filling quantity and the tank price.

You can edit that all configuration- and statemessages are not displayed if you uncheck these. Durably you can edit these in the personal settings.

  • No labels