At On this page you will get an overview of the position messages of an object. Although you can locate the object and display the locate settings.

• Select the object from which you want to see the position messages orcar/group from the select box or
• insert a search string into input field of opened selection box for searching cars and/or groups.input the name of the car and click Start

Position list

In the positions list you will receive informations information about the location of a vehiclemessages. Message are devided into 2 groups, which are displayed different:

1. First group are telemetry messages. These messages shows details of telemetry states.
2. Second group are all other message types, e.g. cyclic location messages. In these messages no telemetry states will be shown.

It is possible to set the same layout for both types of messages. For more information go to display settings.

of a selected single vehicle or the last information about the vehicles of a selected group

Vehicle position list

The shown messages are grouped by date. Newest messages will be on top.

Each Every position record contains the following informationsinformation:

• date, time, weekday,
• cause of message reason,
• position as text, velocity, odometer value,
• telemetry state
• driver (column is only visible if a driver is defined)
• mileage (column is only visible if the box supports it)
• position message depending actions

If the position message is marked with an asterisk, this means A star behing the position message means, that the gps-signal at the moment of location locating was not good enough to get the real a precise position.

Map

To view the position of the message on the map, click on "map".

Details

To see all available information click on "Details".

Following information are available:

Remark

You can assign each position a remark. Click "Details and then "edit" . Input  "delivery note 123" for example. Each time you search for this message, you will remark again display properly.

Tank receipt data 

For each message "IGNITION OFF" will be displayed below details a small tank icon. When you click on it you can input the tank capacity and the tank price.

The description of the place you store by clicking on the ">>". Your stored addresses are now always displayed at this position as blue text instead of plain text message. Each time a vehicle in your fleet is again located in 50 meters radius around this position, is then no longer the street name in position list, but customer XY for example.

Display settings

Using the display settings you can customize the appearance of position messages and lists.There are two ways to change these settings

Group positition list

The group position list is always shown if a group is selected. It shows the current last position message of each vehicle that is a part of the group. 

Each displayed position record contains the basic Information as the vehicle position list, although that optional columns are not visible.

Display time range

The max. shown time range of position messages starts with the current date time and reaches a maximum of 2 months in the past. The time range can not be changed.

Main Actions

If vehicle depending position messages are shown, different global actions are available.

They are shown at the right top, above the position list table.
Image Added

By clicking on the arrow of the dropdown box, a menu will be shown/hidden that contains different actions.

Image Added	General Actions Image Added Reload Position list Triggers a reload of the complete position list for current selection. Image Added One time positioning Initiates an onetime location of this vehicle.
Image Added	Change/Switch Actions Image Added LiveTracker Show the current vehicle LiveTracker as a pop-up.  Image Added Vehicle settings Switches to vehicle settings of current vehicle Image Added Research assistant  Switches to research assistant with pre-selection of current vehicle.
Image Added	Filter & column configuration show search Here you can set extended search criteria. (see below) Image Added Edit filters Opens the dialog for filter configuration. Here you can select the types of the messages that should be displayed by position list. Image Added Column visibility Opens the dialog for column visibility configuration. Here you can configure the optional position list columns that should be displayed:   • Telemetry without name: Shows only the telemetry symbols.   • Telemetry with name: Shows the telemetry symbols with associated input names.   • Battery status: Shows the battery status (in percent) if available for the box.   • Operating hours counter 1   • Operating hours counter 2   • Ground speed Show ??? elements Here you can select, how many position messages should be shown at a single page. If the browser session has expired the predefined value "number of items in position list" from Administration > Portal Settings > Settings is used.

Message depending actions

Each position message has the following associated actions:

Image Added	Show position at map	Shows the location of current position message at map if it has a valid useable GPS signal and is not a private drive.
Image Added	Show details	Shows details of the position message. See here
Image Added	Edit/create address	Create a new address from position message, or edit the address if the location already points to a known address. This functionality is only available if you currently have the rights to edit/create an address. Furthermore the position message must define a valid known location (GPS Signal) and be not part of a private drive.
Image Added	Comment/remark editor	Each position message can declare a comment or remark text. This text is also used by logbook as driving purpose.
Image Added	Fuel data editor	Each "IGNITION OFF" position message can define a refuel action. You must declare the amount of fueled liters and the payed money. A tankstop can contain information about fuel and/or AdBlue. Optional a fuel card can be defined. The available fuel cards can be defined by Administration > Display > Fuel cards

In addition the position is also displayed at map if you click on the position text.

Details

The detailed view shows you all available position message informations. They are separated into different main areas, displayed by tabulators:

The following main areas can be shown:

General

All general data without an specific other meaning: 

• Message date
• Mileage
• Speed/velocity
• Telemetry Inputs
• GPS quality
• GPS position
• Processing date
• Messages
• Orders
• Tours

Messages, Orders and Tours

For messages, orders and tours, you can furthermore access the corresponding linked messages, orders and tours.

FMS/CAN

All data depending to an FMS/CAN message. This area is only shown, if the message contains the required data.

The following information are available:

• cruise control on/off
• PTO on/off
• engine speed
• Speed
• number of clutch entered
• number of break entered
• overspeed warning
• accelerator position
• axle load
• fuel level in %
• cooling water temperature
• total fuel used

The single parts are only shown if the object/vehicle sends the required info. 

Temperature data

If an box sends anlog or EuroScan/Thermoking data, they are displayed inside this tab.

Fuel data editor

Here you can declare Information about refueling, depending to the specific position message.

Each "IGNITION OFF" signal message can contain this optional fuel info. You have to declare the fuel liters, the fuel price and optionally
an used fuel card. A tankstop can contain information about fuel and/or AdBlue. Fuel cards can be declared via Administration > Display > Fuel Cards.

Remark/comment text editor 

You can define a comment or remark text for each position message. This is used as drive reason, for example by logbook.

Positioning

Here all information about locating are shown:

• Time interval on/off
• Distance interval on/off
• Course change on/off
• overspeed warning on/off
• idle on/off 

Digitacho data

If the position message is a digitacho message these information are shown:

• Position message date
• digitacho message date
• the associated driver (driver 1 or driver 2)
• Driver key

Raw data

The raw data view shows only the raw position message data string.

Position list filter

With the filters you can define the types of data, that should be displayed inside the position list.

The following filters are available:

• Telemetry messages
• Status messages
• Configuration messages
• FMS/CAN messages
• digitacho message
• area messages
• all other messages

All filters can be combined freely, but at least one filter must be selected. 

Extended search criteria

You have the possibility to extend your search by further, optional parameters. Click on show search to do so.

Time range

By default you will see the messages of the last 2 months. You can adjust your selection by using fast selection or setting a start and end date manually. These have to be within the last 2 years and shall not be more than 2 months apart.

Address

By using address search you can search within a given radius of an adress. Set your desired coordinates first. You can do this by using the map view or address book. To enter an address manually, you need to open the map view as well. Here you can use the search field. Click on set to apply your selected address to the map. Afterwards you can go back to position search by clicking on use selected position. To choose an address from address book just click on the desired row.

Via search radius you can set within which area you want to search. It can be between 50 and 5000 m and needs to be set in 50 steps. You can edit it by using slider, the input field or adjusting it directly in map view. If you do not set an address, it will not affect your search.

You can change the address as often as you want. To delete the address filter from your search, click on the red cross on the right side.

Please note that private drives might be hidden while using address filter depending on your company settings.

• number of items in lists: presented without having to scroll the number of messages.
• telemetry status in position data: Determine whether the telemetry status is to be displayed in each message or only messages generated by changing a telemetry status.
• Hide message types: You can hide certain messages in the message list. Click in the box next to the message type which you want to hide.