TODO
Es können beliebig viele Gebiete definiert werden. Die Anzahl der gleichzeitig verwendbaren Gebiete je Fahrzeug ist je nach Box und Firmwarestand verschieden.Gebiete sind prinzipiell rechteckig.
ACHTUNG: Es macht keinen Sinn, Gebiete zu definieren, die eine Kantenlänge kleiner 100 Meter haben. Auf Grund der Schwankungen im GPS-System würden unsinnige Warnmeldungen entstehen.
Alarmgebiet anlegen
Klicken Sie auf das entsprechende Symbol in der QuickBar.
Geben Sie als erstes einen Namen für das Gebiet ein (z.B: "Firma").
Klicken Sie nun auf Karte anzeigen und bestimmen Sie das Alarmgebiet.
Dazu zoomen Sie die Karte zuerst so, daß sie den gewünschten Gebietssausschnitt sehen.
Klicken Sie nun auf das Kartensymbol zum Gebiet zeichnen und warten Sie eine Sekunde.
Sie können nun die linke Maustaste gedrückt halten und das Gebiet aufziehen.
Wenn Sie das Gebiet markiert haben, klicken Sie auf das Kartensymbol zum speichern.
Klicken Sie nun auf die den Link Alarmgebiet speichern.
Alarmgebiet anzeigen
Um ein Alarmgebiet auf der Karte anzuzeigen, klicklen Sie einfach auf das Anzeige-Symbol () in der Liste.
Alarmgebiet löschen
Alarmgebiete die aktuell in der Benutzung sind, können nicht gelöscht werden.
Diese müssen zuerst in der Gebietsüberwachung deaktivert werden.
Ist das entsprechende Gebiet deaktiviert wurden, kann dies jetzt mit dem Lösch-Symbol () gelöscht werden.
Schaltflächen der Quickbar: |
---|
| Neu | Neues Alarmgebiet erstellen |
| Anzeigeeinstellungen | Anzeigeeinstellungen im Portal anpassen |
| Hilfe | Diese Hilfe aufrufen |
| Quicklink | Seite als QuickLink einrichten |
Alarmgebiet anlegen
Klicken Sie auf das entsprechende Symbol in der QuickBar. Geben Sie als erstes einen Namen für das Gebiet ein. (z.B: "Firma") Klicken Sie nun auf Karte anzeigen und bestimmen Sie das Alarmgebiet.
Dazu zoomen Sie die Karte zuerst so, daß sie den gewünschten Gebietssausschnitt sehen.
Klicken Sie nun auf das Kartensymbol zum Gebiet zeichnen und warten Sie eine Sekunde.
Sie können nun die linke Maustaste gedrückt halten und das Gebiet aufziehen.
Wenn Sie das Gebiet markiert haben, klicken Sie auf das Kartensymbol zum speichern.
Klicken Sie nun auf die den Link Alarmgebiet speichern.
Alarmgebiet löschen
In der Liste der Alarmgebiete sehen Sie alle angelegten Alarmgebiete. Ist ein Alarmgebiet in Benutzung, kann es nicht gelöscht werden. Sie müssen es dann zuerst unter Gebietsüberwachung aktivieren deaktivieren.
Alarmgebiete die nicht in Benutzung sind können über das entsprechende Symbol in der Liste gelöscht werden.
zurück zu Profi Portal
Alarmgebiete