You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Configuration of location settings.

Inhaltsverzeichnis

GPS-based location

Position if ignition is on every X-minutes

You can set a minutes interval, how often the box sent the current position when the ignition is on.
After you change the time, you can set the setting with the button "SWITCH ON".

If this setting is not desired, you can deactivate with the button "SWITCH OFF".

The box acknowledge the receipt of setting with a status message in the position list.

Position if ignition is on every X-kilometer

You can set a km interval, how often the box sent the current position when the ignition is on.
After you change the time, you can set the setting with the button "SWITCH ON".

If this setting is not desired, you can deactivate with the button "SWITCH OFF".

The box acknowledge the receipt of setting with a status message in the position list.

Course change

If this setting is enabled, the box sent the current position at each cahnge of course.
If this setting is not desired, you can deactivate with the button "SWITCH OFF".

The box acknowledge the receipt of setting with a status message in the position list.

Speed more than X-kilometer & longer than X-minutes

TODO

Speed lower than X-kilometer & lower than X-minutes

TODO

Telemetric base location

TODO

Report settings

You can here configure the idle report.
The value of "Speed lower than" is used for this setting.
In addition, a history is written when the user enabled / disabled the setting.

Selfgeofence

TODO

Immediate activation/deactivation

Here you can activate / deactivate the self-geofence.
It is the radius configuration used, which was successful transmitted to the box.
If the radius never configured in the box, it is 250 meters.
The box acknowledge the receipt of setting with a message in the position list.

Configuration

  • radius: Corresponds to the size of the area around the position of the tracking unit in the activation of self-geofence.
  • activation: The telemetry input and the status is selected when the self-geofence to be activated (eg. at ignition off -> activation self-geofence)
  • deactivation: The telemetry input and the status is selected when the self-geofence to be deactivated (eg. at ignition on -> deactivation self-geofence)
  • block: Optional, the self-geofence can be activated in a particular case (Input 1 activated -> block self-geofence ).
  • No labels