Skip to Content

Wiki source code of Alarmgebiete

Last modified by YellowFox_RD on 2025/01/16 12:51
Show last authors
1 (% class="box" %)
2 (((
3 Table of Contents
4 )))
5
6 {{toc/}}
7
8 When driving and leaving the area, the vehicle generates a message.
9
10 = Notes =
11
12 (((
13 * Please note the basics of [[area monitoring>>doc:YellowFox Standard Portal.Verwaltung.Gebietsüberwachung KST.Gebietsüberwachung aktivieren.WebHome]].
14 * The number of simultaneously usable areas depending of hardware and firmware version are different.
15 * Areas are rectangular
16 )))
17
18 = Functions =
19
20 == Create new alert area ==
21
22 To create a new alert area, click on the appropriate icon ([[image:new.png]]) in the quickbar.
23 First enter a name for the area (e.g. Company ).
24 Optional you can specify a cost center.
25 To draw a new area, you must zoom in into the desired map section.
26 With the function "draw area" you can draw with the left button of mouse a alert section.
27 Now you can save the new alert area.
28
29 (% class="box" %)
30 (((
31 With an edge length of less than 100 meters there may be warning messages due to variations in GPS system.
32 )))
33
34 == Show alert area ==
35
36 To show a existing alert area, click on the show icon ([[image:view.png]]) in the list.
37
38 == Delete alert area ==
39
40 You can't delete a alert area that are currently in use.
41 These areas must be disabled first in [[area monitoring>>doc:YellowFox Standard Portal.Verwaltung.Gebietsüberwachung KST.Gebietsüberwachung aktivieren.WebHome]].
42 After you have disabled the area, you can use the delete icon ([[image:delete.png]]).
43
44
45 |=(% colspan="3" %)Buttons of Quickbar:
46 |[[image:new.png]]|New|Create new alert area
47 |[[image:settings_off.png]]|Display settings|Adapt Display settings
48 |[[image:help.png]]|Help|Opens this help
49 |[[image:quicklink.png]]|Quicklink|Sets the Quick search as Quicklink
50