Wiki source code of FMS/CAN - Fahrervergleich

Last modified by YellowFox_RD on 2025/01/23 13:39

Show last authors
1 (% class="box" %)
2 (((
3 Table of Contents
4 )))
5
6 {{toc/}}
7
8 This report provide an driver comparison, based on the transmiitted FMS/CAN messages.
9
10 = Summary =
11
12 == Content ==
13
14 The basis of the FMS/CAN - driver comparison are the recognized FMS/CAN messages of the detection device. (eg, distance, fuel consumption, ...). This report evaluate on the basis of these FMS/CAN messages with the stored comparison criteria over the evaluation period and display the result in a table based on selected sort criteria in any sort order.
15
16 == Requirements ==
17
18 (((
19 * supported hardware
20 * hardware with enabled driver authentification
21 * rate: Profi XXL
22 )))
23
24 = Options of report =
25
26 == Individual FMS/CAN - driver comparison ==
27
28 When creating a new FMS/CAN - driver comparison you select at least one and over a maximum of 8 comparison criterias, after that you want to provide the drivers. Therefor the tracking portal offers you an selection of already collated comparison profiles. This comparison profiles are an optional requirement to the typical evaluations for fuel consumption, usage,... .You can choose a ready comparison profile, or individually choose between the following comparison criteria.
29
30 === Compare criterias ===
31
32 ==== distance ====
33
34 (((
35 * distance
36 * Ø day distance
37 * max. day distance
38 * Ø tacho speed
39 * max. tacho speed
40 * overspeed warnings
41 * Ø overspeed warnings
42 )))
43
44 ==== fuel consumption ====
45
46 (((
47 * fuel consumption
48 * Ø fuel consumption
49 )))
50
51 ==== time ====
52
53 (((
54 * driven time //( vehicle in motion )//
55 * standing time //( time period without motion )//
56 * percentage drive time / total time
57 * cruise control
58 * percentage cruise control / drive time
59 * ignition on //( It's not a FMS/CAN value. It is an telemetry value of the detection device It' s telemetry 7 = "ignition ON" . )//
60 * idle time //( time period without speed, but with engine speed higher 0rpm and ignition on )//
61 * PTO
62 )))
63
64 ==== other ====
65
66 (((
67 * number of brake entered
68 * number of clutch entered
69 * Ø engine speed
70 * max. engine speed
71 * Ø throttle position
72 * max. engine coolant temperature
73 * Ø engine coolant temperature
74 )))
75
76 === Sort result ===
77
78 When creating a new FMS / CAN - Driver comparison, it's possible to select one of the selected comparison criteria as sorting criteria. The results will be ranked by this criteria in the report output. In the sort order of the sorting criteria can be chosen between ascending and descending.
79
80 == Output formats ==
81
82 this report support the following output formats:
83
84 (((
85 * HTML
86 * PDF
87 * Excel
88 * CSV
89 )))
90
91